Taper Lock Pulley SPB-2

As one of the taper lock pulley manufacturers, suppliers, and exporters of mechanical products, We offer taper lock pulley and many other products.

Please get in touch with us for details.

Mail:[email protected]

Manufacturer supplier exporter of taper lock pulley.

Taper Lock Pulley SPB-2

Taper lock pulley SPB-2 is a type of shaft mounting device that transfers force from the shaft to a V-belt. These pulleys are made from cast iron and are available in various sizes and diameters. They are used in different types of machinery and are designed to help with misalignment.

The taper lock pulley is easy to install and remove and can be placed in a wide range of locations. It is made from cast iron and is durable, so it can be used in a variety of environments.

One major benefit of these pulleys is that the grooves are symmetrical and can accommodate both narrow and conventional section belting. This is a crucial factor in promoting long belt life.

Taper Lock Pulley SPB-2 Specification:

Benefits of Taper Lock Pulley:

They are designed to be drilled and ground to precise tolerances. This can help prevent excessive run-out on the pulleys they are assembled into, which can greatly impact belt lifetime and performance.

These pulleys are also highly accurate, which is essential for motion control systems. Traditional methods of mounting timing pulleys on shafts, such as keys, setscrews, taper locks, and QD bushings, can introduce backlash into the system, resulting in inaccurate movement. The problem with this is that it can negatively affect efficiency and accuracy.

Suitable For A Variety Of Applications:

These pulleys are easy to install and require minimal maintenance. They are also rated for high rim speeds and can be static-balanced on request.

They are also compatible with many types of shafts. Their design allows them to fit inside flanges and reverse flanges or outside traditional flanged hubs.

The tapered lock system reduces the length-through hole size, allowing you to use smaller sprocket hubs. They are also compatible with a wide range of shafts and are more resistant to wear than flange bushings.

Installation of Taper Lock Pulley:

One of the most important parts of any powertrain is the belt pulley, which transfers force from the shaft to the V-belt. However, if you install the pulley incorrectly, it can cause misalignment and other problems that affect efficiency and performance.

To ensure that your pulley is installed correctly, you must follow certain instructions. Here are some of them:

1. Ensure that fit cones, holes and shafts are completely clean and free of oil or dirt.
2. Bushing must be cracked and fatigued.
3. Insert it into the hub so that the holes are properly aligned and matched.
4. Evenly tighten the screws using a torque wrench.
5 Once the screws are fully tightened, you can now assemble your conical lock pulley.

Remove any setting screws or cover screws first. You will also need to remove any lubricant from the threads of the sleeve or cover screws and bushings. After that, you must place the flange of the bush on the conical hub. This will create a snug fit for the shaft.

Once this is done, you must tighten the lid or set the screws to the recommended torque setting.

If you are unsure of the correct torque setting, you can check the torque meter for the specific casing you have. In addition, it is important to ensure that the pattern of the hole matches the thread. After placing the assembly on the shaft, the set screw or cap screw must be tightened evenly to achieve the recommended torque setting. You must also check the bushing for nicks or burrs. You can then insert the key into the shaft keyway and make sure it is installed correctly.

Taper Lock Pulley Application:

Taper lock pulley application is the use of taper lock sleeves as a mechanical link between the shaft and sprocket or pulley. This allows the main components to be flexible enough to accommodate a variety of shaft sizes.

Taper lock sleeves feature keyways and threads, machined to ISO standards to ensure they meet stringent quality requirements. They fit in the conical hub and then tighten the cap screws to create a secure fit for the shaft.