China wholesaler Phosphated Cast Iron Taper Lock Timing Pulleys with Lightening Holes wholesaler

Product Description

CHINAMFG Machinery offers a wide range of high quality Timing Belt Pulleys and Toothed Bars/ Timing Bars.  Standard and non-standard pulleys according to drawings are available .

 
Types of material:
  1. AlCuMgPb 6061 6082 Aluminum Timing Pulley
  2. C45E 1045 S45C Carbon Steel Timing Pulley
  3. GG25 HT250 Cast Iron Timing Pulley
  4. SUS303 SUS304 AISI431 Stainless Steel Timing Pulley
  5. Other material on demand, such as cooper, bronze and plastic
 
Types of surface treatment
 1.  Anodized surface -Aluminum Pulleys
 2.  Hard anodized surface — Aluminum Pulleys
 3.  Black Oxidized surface — Steel Pulleys
 4. Zinc plated surface — Steel Pulleys
 5. Chromate surface — Steel Pulleys; Cast Iron Pulleys
 6. Nickel plated surface –Steel Pulleys;  Cast Iron Pulleys
 
Types of teeth profile

Teeth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL 0.08″(2.032MM)
XL 1/5″(5.08MM)
L 3/8″(9.525MM)
H 1/2″(12.7MM)
XH 7/8″(22.225MM)
XXH 1 1/4″(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M

 
Types of pitches and sizes

Imperial Inch Timing Belt Pulley,
1.     Pilot Bore MXL571 for 6.35mm timing belt; teeth number from 16 to 72;
2.  Pilot Bore XL037 for 9.53mm timing belt; teeth number from 10 to 72;
3.  Pilot Bore, Taper Bore L050 for 12.7mm timing belt; teeth number from 10 to 120;
4.  Pilot Bore, Taper Bore L075 for 19.05mm timing belt; teeth number from 10 to 120;
5.  Pilot Bore, Taper Bore L100 for 25.4mm timing belt; teeth number from 10 to 120;
6.  Pilot Bore, Taper Bore H075 for 19.05mm timing belt; teeth number from 14 to 50;
7.  Pilot Bore, Taper Bore H100 for 25.4mm timing belt; teeth number from 14 to 156;
8.  Pilot Bore, Taper Bore H150 for 38.1mm timing belt; teeth number from 14 to 156;
9.  Pilot Bore, Taper Bore H200 for 50.8mm timing belt; teeth number from 14 to 156;
10.  Pilot Bore, Taper Bore H300 for 76.2mm timing belt; teeth number from 14 to 156;
11.  Taper Bore XH200 for 50.8mm timing belt; teeth number from 18 to 120;
12.  Taper Bore XH300 for 76.2mm timing belt; teeth number from 18 to 120;
13.  Taper Bore XH400 for 101.6mm timing belt; teeth number from 18 to 120;

Metric Timing Belt Pulley T and AT
1.  Pilot Bore T2.5-16 for 6mm timing belt; teeth number from 12 to 60; 
2.   Pilot Bore T5-21 for 10mm timing belt; teeth number from 10 to 60; 
3.   Pilot Bore T5-27 for 16mm timing belt; teeth number from 10 to 60; 
4.   Pilot Bore T5-36 for 25mm timing belt; teeth number from 10 to 60; 
5.   Pilot Bore T10-31 for 16mm timing belt; teeth number from 12 to 60; 
6.   Pilot Bore T10-40 for 25mm timing belt; teeth number from 12 to 60; 
7.   Pilot Bore T10-47 for 32mm timing belt; teeth number from 18 to 60; 
8.   Pilot Bore T10-66 for 50mm timing belt; teeth number from 18 to 60;
9.  Pilot Bore AT5-21 for 10mm timing belt; teeth number from 12 to 60;
10. Pilot Bore AT5-27 for 16mm timing belt; teeth number from 12 to 60;
11. Pilot Bore AT5-36 for 25mm timing belt; teeth number from 12 to 60; 
12. Pilot Bore AT10-31 for 16mm timing belt; teeth number from 15 to 60; 
13. Pilot Bore AT10-40 for 25mm timing belt; teeth number from 15 to 60; 
14. Pilot Bore AT10-47 for 32mm timing belt; teeth number from 18 to 60; 
15. Pilot Bore AT10-66 for 50mm timing belt; teeth number from 18 to 60;
  
Metric Timing Belt Pulley HTD3M, 5M, 8M, 14M 
1.  HTD3M-06; 3M-09; 3M-15; teeth number from 10 to 72; 
2.  HTD5M-09; 5M-15; 5M-25; teeth number from 12 to 72; 
3.  HTD8M-20; 8M-30; 8M-50; 8M-85 teeth number from 22 to 192; 
4.  HTD14M-40; 14M-55; 14M-85; 14M-115; 14M-170; teeth number from 28-216; 
5.  Taper Bore HTD5M-15; 8M-20; 8M-30; 8M-50; 8M-85; 14M-40; 14M-55; 14M-85;
         14M-115; 14M-170

Metric Timing Belt Pulleys for Poly Chain GT2 Belts 
1.      PCGT8M-12; PCGT8M-21; PCGT8M-36; PCGT8M-62; 
2.      PCGT14M-20; PCGT14M-37; PCGT14M-68; PCGT14M-90; PCGT14M-125;

Power Grip CHINAMFG Tooth/ PGGT 2GT, 3GT and 5GT 
1. 2GT-06, 2GT-09 for timing belt width 6mm and 9mm 
2. 3GT-09, 3GT-15 for timing belt width 9mm and 15mm 
3. 5GT-15, 5GT-25 for timing belt width 15mm and 25mm

OMEGA RPP HTD Timing Pulleys 
1.   RPP3M-06; 3M-09; 3M-15; teeth number from 10 to 72; 
2.   RPP5M-09; 5M-15; 5M-25; teeth number from 12 to 72; 
3.   RPP8M-20; 8M-30; 8M-50; 8M-85 teeth number from 22 to 192; 
4.   RPP14M-40; 14M-55; 14M-85; 14M-115; 14M-170; teeth number from 28-216; 
5.  Taper Bore RPP5M-15; 8M-20; 8M-30; 8M-50; 8M-85; 14M-40; 14M-55; 14M-85;
     14M-115; 14M-170

Standard Or Nonstandard: Standard
Application: Motor, Motorcycle, Machinery, Marine, Agricultural Machinery, Industry
Hardness: Soft Tooth Surface
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Cast Iron
Samples:
US$ 4/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

taper lock pulley

How do you select the right taper lock pulley for a specific industrial application?

Choosing the right taper lock pulley for a specific industrial application requires careful consideration of several factors to ensure optimal performance and efficiency. Here is a detailed explanation of the key steps involved in selecting the right taper lock pulley:

  1. Determine Power Transmission Requirements: Begin by evaluating the power transmission requirements of the application. Consider factors such as the required torque, speed range, and power input. This information will help determine the appropriate size and capacity of the taper lock pulley needed to handle the power transmission demands of the application.
  2. Identify Speed Control Needs: Assess whether the application requires adjustable speed control. If speed control is necessary, variable speed taper lock pulleys may be required. Evaluate the desired speed range and the adjustability range needed to meet the application’s requirements.
  3. Analyze Belt or Chain Compatibility: Consider the type of belt or chain that will be used with the taper lock pulley. Evaluate the belt or chain width, pitch, and profile to ensure compatibility with the pulley’s groove profile. It is essential to select a taper lock pulley that matches the belt or chain specifications to ensure optimal power transmission and grip.
  4. Assess Environmental Factors: Evaluate the environmental conditions in which the taper lock pulley will operate. Consider factors such as temperature, humidity, dust, and chemical exposure. In corrosive or abrasive environments, specialty taper lock pulleys with appropriate coatings or materials may be required to ensure durability and longevity.
  5. Consider Space Constraints: Take into account any spatial limitations or constraints within the application. Measure the available space for the taper lock pulley and ensure that the selected pulley size will fit properly without interference or clearance issues.
  6. Consult Manufacturer’s Guidelines: Refer to the manufacturer’s guidelines, specifications, and recommendations for the specific taper lock pulley models being considered. Manufacturers often provide detailed information on pulley capacities, dimensions, and application suitability. Following the manufacturer’s guidelines can help ensure the selection of a suitable and reliable taper lock pulley.
  7. Seek Expert Advice if Needed: If you are uncertain about the selection process or have unique requirements, it is advisable to seek expert advice from engineers, suppliers, or manufacturers. They can provide valuable insights and recommendations based on their expertise and experience.

By following these steps and considering the power transmission requirements, speed control needs, belt or chain compatibility, environmental factors, space constraints, manufacturer’s guidelines, and seeking expert advice if necessary, you can select the right taper lock pulley for a specific industrial application. Choosing the appropriate taper lock pulley ensures efficient power transmission, reliable performance, and extended service life in the intended application.

taper lock pulley

What safety considerations should be kept in mind when using taper lock pulleys?

When using taper lock pulleys, it is important to prioritize safety to prevent accidents and ensure the well-being of operators and maintenance personnel. Here are some key safety considerations to keep in mind when using taper lock pulleys:

  • Proper Installation: Ensure that taper lock pulleys are installed correctly following the manufacturer’s instructions and guidelines. Improper installation can lead to pulley misalignment, slippage, or premature failure, posing safety risks. Use the appropriate tools, equipment, and techniques to securely mount the pulleys on the shafts, ensuring a tight and reliable fit.
  • Shaft Locking and Tightening: Pay attention to proper shaft locking and tightening procedures when installing taper lock pulleys. Use the recommended methods, such as torque wrenches or locking devices, to secure the pulley onto the shaft. Insufficient tightening or inadequate shaft locking can result in pulley dislodgement or unexpected movement, potentially causing accidents or injuries.
  • Personal Protective Equipment (PPE): Wear appropriate personal protective equipment, such as safety glasses, gloves, and protective clothing, when working with taper lock pulleys. PPE helps protect against potential hazards, such as flying debris or contact with sharp edges, during installation, maintenance, or repair tasks.
  • Lockout/Tagout Procedures: Follow lockout/tagout procedures when performing maintenance or repair work on machinery or equipment that involves taper lock pulleys. Lockout/tagout procedures ensure that the machinery is isolated from its power source and cannot be accidentally started or energized during maintenance activities. This prevents unexpected movement of pulleys and reduces the risk of entanglement or other accidents.
  • Regular Inspection and Maintenance: Conduct regular inspections and maintenance of taper lock pulleys to identify any signs of wear, damage, or deterioration. Inspect for cracks, deformation, or looseness in the pulley and the taper lock bushing. Address any identified issues promptly by replacing damaged components or adjusting the pulley installation. Regular maintenance helps prevent unexpected failures that could lead to accidents or operational disruptions.
  • Training and Familiarity: Ensure that operators and maintenance personnel receive proper training and are familiar with the safe handling and operation of taper lock pulleys. Training should cover topics such as installation procedures, safety precautions, and emergency response protocols. Well-trained personnel are better equipped to identify potential safety hazards and take appropriate actions to mitigate risks.
  • Adherence to Manufacturer’s Guidelines: Follow the manufacturer’s guidelines, recommendations, and limitations regarding the use of taper lock pulleys. Manufacturers provide specific instructions and safety information that should be followed to ensure safe and proper usage. Deviating from these guidelines may compromise safety and could lead to accidents or equipment damage.

By considering these safety measures when using taper lock pulleys, you can help create a safer working environment, minimize the risk of accidents, and ensure the efficient and reliable operation of machinery and equipment.

taper lock pulley

What are the benefits of using taper lock pulleys in various systems?

Taper lock pulleys offer several benefits when employed in various systems. These benefits contribute to efficient power transmission, secure shaft connection, and ease of installation and maintenance. Here are the key advantages of using taper lock pulleys:

  • Secure Shaft Connection: Taper lock pulleys provide a secure connection between the pulley and the shaft. The wedging action of the taper lock bushing creates a tight grip on the shaft, minimizing the risk of slippage or movement, even under high torque loads. This secure connection ensures reliable power transmission and reduces the likelihood of component failure.
  • Easy Installation and Adjustment: Taper lock pulleys are designed for easy installation and adjustment. The taper lock system allows for quick and straightforward mounting of the pulley on the shaft. The bushing can be easily inserted into the tapered bore of the pulley hub and tightened using screws or bolts. This ease of installation saves time and effort during initial setup or when replacing or adjusting pulleys.
  • Versatility and Interchangeability: Taper lock pulleys offer versatility and interchangeability. The taper lock bushing can be used with various pulley sizes and types, allowing for flexibility in system design and modification. If the power transmission requirements change or pulley replacement is needed, the same taper lock bushing can be used with a different pulley, eliminating the need for shaft modifications.
  • Reduced Downtime and Maintenance Costs: The ease of installation and removal associated with taper lock pulleys helps reduce system downtime and maintenance costs. When maintenance or repairs are required, the pulley can be easily removed from the shaft by loosening the screws or bolts on the bushing. This feature simplifies the replacement of worn or damaged pulleys, minimizing production interruptions and maintenance expenses.
  • Efficient Power Transmission: Taper lock pulleys ensure efficient power transmission. The secure shaft connection and minimal slippage provided by the taper lock system maximize power transfer from the driving source to the driven component. This efficiency is particularly important in applications where accurate speed control, torque transmission, and synchronization are required.
  • Durable and Reliable: Taper lock pulleys are designed to be durable and reliable. The materials used, such as steel or cast iron for the pulley and bushing, provide strength and longevity. The secure shaft connection and reduced slippage contribute to the overall reliability of the system, minimizing the risk of unexpected failures and downtime.
  • Wide Range of Applications: Taper lock pulleys find applications in various industries and systems. They are commonly used in industrial machinery, power transmission systems, conveyor systems, HVAC systems, automotive accessories, mining equipment, and construction machinery. The versatility of taper lock pulleys makes them suitable for a broad range of applications that require efficient power transmission and secure shaft connection.

In summary, using taper lock pulleys in various systems provides benefits such as secure shaft connection, easy installation and adjustment, versatility, reduced downtime, efficient power transmission, durability, and wide applicability. These advantages make taper lock pulleys a reliable choice for applications that require effective power transmission, secure shaft connection, and ease of maintenance.

China wholesaler Phosphated Cast Iron Taper Lock Timing Pulleys with Lightening Holes   wholesaler China wholesaler Phosphated Cast Iron Taper Lock Timing Pulleys with Lightening Holes   wholesaler
editor by CX

2023-10-09

Taper lock pulley

As one of the taper lock pulley manufacturers, suppliers, and exporters of mechanical products, We offer taper lock pulley and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of taper lock pulley.

Recent Posts